Profile Design Supersonic Ergo+ 50SLC carbon aerobar black

The Profile Design Supersonic Ergo+ 50SLC carbon top handlebars black offers industry-leading ergonomics, adjustability and low weight - maximizing your comfort and speed.

The Supersonic is the premium model of the Flyt series of brackets - using an innovative internal wedge clamp to securely hold the extension.

It offers easier adjustments and greater reach than anything that came before it.

It is now paired with the new Ergo+ armrest that takes the popular Ergo shape and adds 40mm length and a new textured cushion.

Performance
The Supersonic/Ergo+ platform is designed to give riders the freedom to find their best possible position with a huge range of independence adjustments.

Fit Details
- Armrest offset: -85mm to -17.5mm in 15mm increments
- Armrest width: 124mm to 290mm in 18.5mm increments (with 100mm extensions)
- Armrest Stack: 58.5mm (without riser kit) to 138.5mm in 5mm increments (with aftermarket riser kit)
- There are 80 different positions possible by moving the armrests. Combine that with risers and this bar offers 1440 possible configurations. As a clip-on bar, it is also possible to easily adjust extension width and slope.

Origin story
The supersonic was the first of our generation of brackets - the result of careful analysis of how riders use their aerobars and the adjustments that need to be made.

Extensions
- Extension shape: The 50 SLC extensions offer a 50deg ski bend shape.
- The 50 SLC offer a lateral shift of 7.5mm per side. This allows the rider to get their hands narrower or wider without tilting the extensions so that the shifters touch.
- The SLC extensions offer the same ergonomic capabilities as the previous generation, but the weight has been halved. This also allows Di2 components to be mounted in the extension.
- All extensions have a diameter of 22.2 mm in the clamping area.
- They are 400 mm long and can be cut to fit almost any rider.
- They are drilled for cable routing to the rear.

Accessories
The Supersonic bracket can be combined with the Supersonic BTA mount - specially designed for a safe, clean and adjustable bottle cage mount for this bracket.
- Supersonic BTA mount: This bracket is compatible with the Profile Design Universal Riser Kits for fine tuning the aerobar stack.
- Universal Riser Kits.

Specifications:
- Bracket: Supersonic
- Clamp Diameter: 31.8mm (26.0 w/Shims)
- Armrest: Ergo+ / 10mm pads
- Armrest width: 124mm to 290mm in 18.5mm increments (with extensions at 100mm)
- Armrest offset: -85mm to -17.5mm in 15mm increments
- Armrest Stack: The minimum is 58.5mm and the bracket is compatible with our existing risers that stack up to 138.5mm with (70mm of spacers added).

Torque settings (all bolts are M6)
- Handlebar clamp: 6Nm
- Extension clamp: 5Nm
- Armrest bolts: 4.7Nm

Weight
- Bracket: 272g
- Armrest: 217g
- Extensions: 140g
- Total: 628g